Your cart is currently empty
ALL AROUND TRAIL ENJOYMENT
HAVING FUN
Series 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs
RockShox Recon Silver RL 27.5", 130mm Travel, Solo Air, Compression and Rebound Adjustment, Alloy Tapered Steerer, Fast Black Uppers, 110x15mm Boost Spacing, Maxle Stealth, 37mm Offset
RockShox Deluxe Select R, Debonair Air Sleeve, Rebound Adjustment, Custom Tune, 210x50mm, M8x25mm Hardware
Marin, Double Wall Alloy, 29mm Inner, Pinned Joint, Disc Specific, 32H, Tubeless Compatible
Shimano HB-MT410B, 148x12mm, Centerlock, Microspline Freehub Body
Shimano HF-MT410B, 110x15mm, Centerlock
14g Black Stainless Steel
Vee Tire Flow Snap 27.5x2.35", Tackee Compound, Tubeless Ready
Shimano Deore, 12-Speed, SGS
-
Shimano Deore, 12-Speed, SL-7100R
FSA Comet, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing
Mega EXO 73mm BSA
KMC X-12 Silver and Black
Shimano, Deore 12-Speed, 10-51T
Shimano BR-MT200 Hydraulic Disc, 180mm Rotor
Shimano BR-MT200 Hydraulic Disc, 180mm Rotor
Shimano BL-MT201 Hydraulic
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
Marin 3D Forged Alloy, 35mm
Marin Single Clamp Locking
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
TranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 175mm Travel, 30.9mm
Marin Speed Concept
-
Bolt-On Thru-Axle
Specifications, pricing, and availability are subject to change without notice.
XS | S | M | L | XL | |
---|---|---|---|---|---|
STACK | 579 | 583.6 | 588.2 | 597.3 | 601.9 |
REACH | 410 | 425 | 445 | 465 | 485 |
HEADTUBE ANGLE | 66.5° | 66.5° | 66.5° | 66.5° | 66.5° |
HEADTUBE LENGTH | 105 | 110 | 120 | 125 | 130 |
SEATTUBE ANGLE | 75° | 74.7° | 74.5° | 74.3° | 74.1° |
SEATTUBE LENGTH | 330 | 380 | 425 | 470 | 515 |
TOPTUBE EFFECTIVE | 570.6 | 586.8 | 608.1 | 632.9 | 651.9 |
BB HEIGHT | 338.5 | 338.5 | 338.5 | 338.5 | 338.5 |
BB DROP | 18 | 18 | 18 | 18 | 18 |
CHAINSTAY | 430 | 430 | 430 | 430 | 430 |
WHEELBASE | 1129.4 | 1146.3 | 1168.3 | 1192.3 | 1214.3 |
STANDOVER HEIGHT | 647 | 665 | 702 | 727 | 768 |
FORK OFFSET | 42 | 42 | 42 | 42 | 42 |
SEATPOST DIAMETER | 30.9 | 30.9 | 30.9 | 30.9 | 30.9 |
HANDLEBAR WIDTH | 780 | 780 | 780 | 780 | 780 |
STEM LENGTH | 35 | 35 | 35 | 35 | 35 |
CRANK LENGTH | 170 | 170 | 175 | 175 | 175 |
All lengths in millimeters
The Rift Zone 27.5 has a Series 3 6061 butted and hydroformed aluminum frame with 120mm travel MultiTrac suspension technology and playful 27.5” wheels. 27.5” wheels fit most riders better and create a lightweight and responsive bike, the most playful trail bike in the line.
LEARN MOREMultiTrac is an acclaimed suspension system, fine-tuned to have a balanced ride capable of absorbing big hits with an efficient pedaling platform. The rocker link provides a progressive leverage ratio for the rear shock for small bump sensitivity and the feeling of a long travel system on large drops and rocks.
Trail geometry with short chainstays, low bottom bracket, long top tube, and a slack head angle combined with lightweight and responsive 27.5” wheels make for a playful and quick handling bike.
Rift Zone 27.5 models are compatible with internally routed dropper posts, with internal rear derailleur routing for a clean look and snag free ride.
Boost front spacing is paired with a 148x12mm Boost rear thru-axle on the Rift Zone 27.5 3 and Rift Zone 27.5 2 for frame and wheel strength, and future wheel upgrade compatibility.
The Rift Zone 27.5 1 is spec’d with a 141x9mm axle that is upgradable to a Boost 148x12mm standard, allowing for more options if you decide to take your bike to the next level.
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
LBS | KG | PSI |
---|---|---|
120 | 54 | 127 |
130 | 59 | 130 |
140 | 64 | 135 |
150 | 68 | 140 |
160 | 73 | 146 |
170 | 77 | 152 |
180 | 82 | 166 |
190 | 86 | 180 |
200 | 91 | 195 |
210 | 95 | 205 |
220 | 100 | 215 |
230 | 104 | 225 |
240 | 109 | 235 |
250 | 113 | 245 |
260 | 118 | 255 |
270 | 122 | 265 |